mobilewrap-bg-img
pagebannerbg-d-img

Non-Surgical

Tetra PRO CO2 Laser Perth

The Tetra PRO CO2 laser is a skin resurfacing system used to address changes in texture, pigmentation, age-related concerns, and scarring with settings that can be adjusted to suit your individual needs.

Jump to section
Tetra PRO CO2 Laser
Suitable Candidates
Areas
Recovery
Possible Risks
Consultation
FAQs

What Is the Tetra PRO CO2 Laser?

The Tetra PRO CO2 laser is a medical-grade carbon dioxide (CO2) device used for fractional or fully ablative laser skin resurfacing, including the popular CoolPeel treatment. It works by delivering controlled energy into the skin, where it interacts with water in the surface layers. This process allows targeted removal of selected layers of skin, while surrounding skin remains intact to support recovery.

The Tetra PRO system offers a range of pulse modes and scanning patterns that influence how the energy spreads, how much heat is produced, and how deeply the laser interacts with the skin. These settings allow Dr Anh to adjust the treatment depending on your skin needs. They can be used to address textural changes, pigmentation concerns, or scarring in a personalised way.

Fractional delivery treats tiny points of the skin while leaving small areas of untreated skin between them. Full-field resurfacing treats the entire surface of the skin in the selected area. All settings are chosen based on your skin type, your concerns, and the level of treatment recommended for your goals.

CoolPeel Treatment with Tetra PRO CO2 Laser

CoolPeel is a specific treatment mode of the Tetra PRO CO2 laser that delivers very short pulses of energy to the superficial layers of the skin. It is used to address the appearance of fine lines, uneven texture and mild sun damage, while aiming to limit heat build-up in the surrounding tissues. Depending on your skin, concerns and tolerance for recovery time, Dr Anh may recommend CoolPeel alone or in combination with deeper resurfacing settings, as well as the likely number of treatment sessions.

Who Is a Suitable Candidate for the Treatment?

Suitability varies from patient to patient, and Dr Anh will assess your medical history, skin condition, and treatment goals during your consultation. This helps ensure the treatment is appropriate and planned around your needs.

Patients who may be suitable include those who:

  • Would like to address age-related changes in the skin
  • Have concerns about skin texture changes
  • Have uneven pigmentation or sun-related skin changes
  • Want to address acne scarring
  • Prefer a treatment that targets specific skin layers
  • Are in good general health
  • Understand the recovery involved with laser skin resurfacing

Patients who may not be suitable include those with:

  • Active skin infections
  • Certain medical conditions that may affect healing
  • Recent use of photosensitising medications
  • A history of keloid scarring
  • Recent significant sun exposure
  • Unrealistic expectations about the treatment

A consultation with Dr Anh is essential, as she will assess your skin, medical history, overall health, and suitability for the procedure before developing a personalised treatment plan.

What Areas Can be Treated?

The Tetra PRO CO2 laser can be used on several parts of the face and body to address concerns related to skin texture, pigmentation, or scarring. Common treatment areas include:

  • Face
  • Neck
  • Chest
  • Around the eyes
  • Around the mouth
  • Areas affected by scarring

The number of areas treated in one session depends on your goals, your skin condition, and the depth of resurfacing required. Dr Anh will recommend the areas most appropriate for your concerns after examining your skin.

How Is the Treatment Performed?

Before treatment, your concerns are discussed and your skin is assessed to determine the appropriate level of resurfacing. This assessment helps guide the choice of pulse mode, scanning pattern, and treatment depth. The goal is to tailor the approach to your individual skin characteristics and treatment needs.

A typical session may include the following steps:

treatmentplaceholder-img

Skin Preparation

The area is cleansed and protective eyewear is provided.

treatmentplaceholder-img

Anaesthetic

A numbing cream may be applied if suitable to help minimise discomfort.

treatmentplaceholder-img

Laser Delivery

The Tetra PRO system delivers controlled energy using fractional or full-field settings based on your treatment plan.

treatmentplaceholder-img

Cooling or Protection

Soothing products may be applied after the laser application.

treatmentplaceholder-img

Aftercare Instructions

You receive guidance on how to care for the treated area at home.

Appointment times can vary and often range from 20 to 60 minutes, depending on the area being treated and the depth selected. Sensations during the procedure differ between patients, and some may describe warmth or tingling while others have a different experience. Return to normal activities also varies, as healing times depend on individual responses and the intensity of the treatment.

How Many Tetra PRO CO2 Laser Treatments Are Needed?

The number of Tetra PRO CO2 laser treatments varies from patient to patient, as each person’s skin and goals are different. Some concerns may be addressed with a single session, depending on the depth of treatment required. Other concerns may need additional sessions planned over a longer period.

An initial plan is created after assessing your skin condition, goals, and medical history. This allows the treatment approach to be adjusted to your specific needs. The level of resurfacing will influence how many sessions may be recommended.

Follow-up appointments help monitor how your skin responds over time. These visits also provide an opportunity to discuss whether further sessions may be useful. Dr Anh will guide you through this process and recommend adjustments when appropriate.

What Is Recovery Like After the Treatment?

Recovery experiences vary from patient to patient and depend on the depth of resurfacing performed. Temporary effects may include redness, swelling, warmth, or a sunburn-like sensation. As the skin heals, it may feel dry, tight, or rough before settling.

After your session, you may be advised to:

  • Keep the area clean
  • Avoid rubbing or picking the skin
  • Protect the area from sun exposure
  • Follow moisturising instructions
  • Delay makeup or active skincare products until advised

Your progress will be checked by Dr Anh so any needed adjustments to your care can be discussed. This helps ensure your recovery plan remains appropriate for your needs. Regular communication during healing allows for timely guidance and support.

What Are the Possible Risks of Tetra PRO CO2 Laser Treatment?

All cosmetic procedures carry risks, and experiences vary between patients. The Tetra PRO CO2 laser may involve temporary or delayed effects depending on your treatment depth and skin characteristics.

Possible risks include:

  • Redness
  • Swelling
  • Sensitivity
  • Pigmentation changes
  • Infection
  • Delayed healing
  • Scarring

During your consultation, Dr Anh will discuss these risks with you and outline steps that may help support safe healing. She will also explain the factors that may affect your personal level of risk.

What Happens During the Consultation for Tetra PRO CO2 Laser Treatment?

During your consultation at Dr Anh’s Perth clinic, you will have the opportunity to discuss your concerns, goals, and medical history. Your skin will be examined to understand its texture, pigmentation, scarring, and overall condition. This assessment helps guide planning for suitable laser skin resurfacing options.

You will receive clear information about how the Tetra PRO CO2 laser works and what you may expect before, during, and after treatment. Recovery timelines and possible risks are also explained in a detailed manner. This discussion helps you understand what is involved so you can make an informed decision.

After reviewing your needs, Dr Anh will create a personalised treatment plan that reflects your goals and the areas being considered for treatment. She will also take into account your skin type and any relevant medical factors. This ensures the approach is tailored to your individual circumstances.

Frequently Asked Questions

Are there discomforts associated with the treatment?

Discomfort varies from patient to patient. A numbing cream may be used if suitable.

How long does a Tetra PRO CO2 laser session take?

Sessions usually take 20 to 60 minutes. The timing depends on the area and treatment depth.

When will I see changes in my skin?

Timing differs between patients. Each person’s healing response is unique.

Can the Tetra PRO CO2 laser be combined with other treatments?

It may be combined with other non-surgical treatments when appropriate. This is assessed during your consultation.

Are the results permanent?

No cosmetic treatment provides permanent results. Skin naturally changes over time.

Why Choose Dr Anh for Tetra PRO Laser Treatment

Dr Anh Nguyen is a Specialist Plastic Surgeon in Perth with training and experience in both aesthetic and reconstructive care. She develops treatment plans based on each patient’s individual concerns, goals, and medical history. This approach supports personalised care for a wide range of skin needs.

Throughout your treatment, Dr Anh explains each stage so you understand what is involved before, during, and after the procedure. She provides information in a clear and easy-to-follow way. This helps patients feel informed and prepared throughout their care journey.

Safety and careful assessment are central to her practice. Dr Anh takes the time to review your needs and discuss suitable options. This ensures any treatment decisions are based on accurate information and your individual circumstances.

MED0001193810

Dr Anh Nguyen

MBBS (HONS) PGRADDIPSURGANAT FRACS (PLAST)

Dr. Anh Nguyen is a member of several esteemed professional organisations, underscoring her commitment to the highest standards of surgical and patient care. Some of her affiliations and recognitions include:

Learn More

ASPS logo ASAPS logo FRACS logo
Dr Anh Nguyen, Perth Female Plastic Surgeon 5

Contact us

Ready to take the next step or have questions? Reach out to our friendly team. We’re here to guide you on your aesthetic journey.

(08) 9322 2659

map-d-img 88 Belmont Ave, Rivervale, WA, 6103

Ask us a question

Fill in the form below and one of our team will be in touch as soon as possible.

This field is for validation purposes and should be left unchanged.
Phone us
Search
Contact us
Menu